...Install the rear disc brake rotors; refer to Section 206-04 . Install the axle housing cover and fill the rear axle housing (4010) with 2.4 liters (5.5 pints) of specified lubricant; refer to Axle ...
...rear cover plate from the differential. Rotate the ring gear until you find the cross shaft bolt. Remove the bolt. Then remove the shaft and roll the spider gears out. Push the axle end in from the ...
...the halfshaft with a new retainer circlip and a new rear axle wheel hub retainer. CAUTION: Never use power tools to tighten the rear axle wheel hub retainer. To install, reverse the removal
...rear axle seal installation tool for a 2002 ford explorer a large socket will work in a pinch. But if you bought the seal from say Advance or Auto Zone they have loan a tool program. If you use a ...
...rear axle seal out of a 1996 4 wheel drive explorer There is a clip on the end of the axle. Here are the steps to remove clip.1 remove inspection cover and drain.2 identify large pin separating side ...
rear diff on my 2000 explorer is leaking from the yoke . How do I replace the seal and add oil to a sealed diff that doesn't have a oil plug? To replace the seal you must pull out the carrier assembly
seal lip and install the seal with a suitable seal driver. Make sure the seal is fully seated in the axle tube. Install the axle shaft. Fill the rear axle with the correct lubricant. Lower the vehicle
Question about Ford Explorer
Install rear brake anti-lock sensor indicator . Tighten retaining bolt to 4.5-6.8 Nm (40-60 lb-in). Install rear disc brake caliper and rear disc brake rotor . Install wheels and tires. --------------
...install the rear wheel bearing. Lubricate the lip of the new wheel bearing oil seal. Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B. Using the special tools, ...
Question about Cars & Trucks
...rear outer seals on the axle and remove any retaining clips that hold them in place. Remove the old seals: Use a seal puller or a flat-blade screwdriver to carefully remove the old seals. Be careful ...
3,523 questions posted
Usually answered in minutes!
2,998 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions