1993 Ford Aerostar Extended "remove clutch fan" Questions

Ad

...remove the clutch fan assembly. It is left handed thread. It has to be removed together. Remove the four bolts to the pulley on front of water pump. and then remove all 14mm bolts around the pump. ...

Ad

Question about Ford Aerostar

1 Answer

...and fan off, that's not easy sometimes, usually the fan and clutch are pulled off using a pulling tool before you remove the pump, take it to a machine shop or Auto zone may help pull it. good ...

Ad

...remove fan clutch, fan blade and shroud from vehicle. Remove four screws and separate fan clutch from fan blade. Item Part Number Description 1 8509 Water Pump Pulley 2 57632-S Screw and Washer ...

Question about Cars & Trucks

1 Answer

...remove clutch fan you need to remove upper fan shroud, you need large wrench to remove the fan clutch retaining nut to remove fan and clutch away from the engine drive belt should keep pulley from ...

...clutch, remove the fan shroud and remove the four screws that attach the fan and clutch assembly to the water pump. Once you have removed the fan and clutch assembly, remove the retaining screws that ...

...Remove the fan clutch-to-water pump hub bolts and remove the fan and clutch assembly and the fan shroud. If necessary, remove the fan-to-fan clutch retaining bolts and separate the fan from the fan ...

Question about Ford Aerostar

1 Answer

...remove fan shroud on radiator(transmission cooler lines may need to be disconnected and slide off the fan clutch harness on the RH side). 3.loosen fan bolts on fan clutch. 4. use fan clutch tool to ...

...remove the fan clutch from the water pump. Remove the upper mounting bolts from the fan shroud. Remove the fan shroud from the radiator by lifting the shroud and pushing inward. To Install: Attach ...

...remove clutch in order to remove fan mounted on its engine-side face. Generally, the clutch drive half shaft must be uncoupled from coolant pump (impeller drive) half shaft using special wrench kit ...

...Remove the fan and clutch as one then unbolt the fan from the clutch. Install fan onto new clutch and reinstall back onto water pump. Put your fan cowling back together and you are done! Good

Not finding what you are looking for?
1993 Ford Aerostar Extended Logo

176 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...