...put vehicle in gear. It has a new clutch mastercylinder should I change out the slave cylinder? did you bleed the slave cylinder? On the slave cylinder there should be a bleeder screw just like a ...
...put new trans in,clutch,slave cyclinder,and clutch master cyclinder, still having problems with the clutch pedal being low, i bleeded the clutch several time but it won't come up any higher, any ...
Question about Ford F-150
...put in was shift in nutral Doesn't matter what gear it's in when you install it. Are you sure you got the shift lever installed right? With the truck not running, can you move the shifter around into ...
put it in correctly there was a little knoch on spinal push it in and it ingaged look right but not properly sure these can be a pain to bleed is it is the slave is new. Keep bleeding it, try a vacuum
...put in new clutch in 2001 f150 2wd 4.2 also new slave and master cylinder and pedal safety switch. After bleeding the pedal feels fine but the clutch does not seem to engage as the shifter will not ...
...put it into gear, will it go in easier? If so the clutch is dragging. There is nothing with the brake lights that will cause it to shift hard. With an automatic trany the brake lights will unlock the ...
new and synchro, and bad forks.. wish I could watch you but key off can you get all gears in the H pattern parked? or is shifter acting crazy loose.? can you start the engine in 1st gear now or put in
Question about Ford F-150
put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder? put a new clutch and a new slave cylinder in a 1992 pontiac trans am. how do you bleed the slave cylinder, I have ...
...new ACT HDMM clutch put in about 2 months ago. my wife was driving the car like always and when she went to put it back in 1st at a stop light it wouldnt go in. the pedal feels stiff as ever having a ...
new slave cylinder, bleed clutch but gears still grind when trying to put into gear unless double clutched. Any other adjustments or suggestions for repair? [email protected] check and make shear
1,474 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
