2005 Ford Expedition "check wiring plug heated seats" Questions

check under the seat where there should be a cluster of wires. Sometimes if the power seat is used alot by sliding back and forth, without this cluster of wires being secured, occassionally a wire can

...push button on either side,the light come on and then go out, need wiring diagram and trouble shooting procedure on all problem with heated seats check plug under seat look for corrsived prongs in ...

...not working, already checked fuse and all wiring is plugged in, any idea what else could be the problem check fues 53 heated seat swichs, wire undwe dash rubed against a bracket, i brought to ...

...seat. the 1 and 2 buttons for the memeory controls beep but the seat never moves CHECK FUSES AND LOOK UNDER SEAT FOR A PLUGS IN WIRE, ALOT OF MODELS HAVE THE POWER PLUG UNDER THE SEAT, TRY THAT ...

...Check the wiring diagrams for each seat if you can find them, otherwise trace the wiring from the internal components in the seat to the connector and make sure the heaters are going to heater power ...

plug that comes from the vehicle itself, you might need to check the resistance of the element. It is rare to have a bad element that still shows continuity, but it is possible that the resistance may

...but light on dash dose Pull the plug for the heating element for the seat and with it "on" check for 12v; you have full voltage then possble bad element. You have no voltage check the wire and

...plug in pigtail of the heating element. Also check your manual of chevy specs. Believe it or not some seat never had a heating element installed both back and bottom of the seats. I refused to fix it ...

check the wire harness under the seat and make sure they are clear of the seat tracks. Next make sure the plug ins under the seat are tight. If only the driver seat is shutting off may be heat element

...Check that the wiring harness plugs under the seats haven't become disconnected. Next thing to check is that the harnesses have power when the controls for heat/cool are activated. Also check the ...