2004 Ford Taurus "anti rattle spring" Questions

...left. CHECK THE SPINDLE STOPS MAY NEED LUBING,, ALSO CHECK THE C.V. AXLES , CHECK THE BRAKE PAD ANTI RATTLE CLIPS/ SPRINGS ALSO HAVE SOME SHAKE THE EXHAUST PIPE AND LISTEN FOR A SHIELD LOOSE GOOD ...

...anti-rattle spring and adjuster spring. NOTE: Note position of operating lever prior to removal. Remove bottom return spring. Remove clip and washer and detach parking brake cable from rear shoe. ...

you're talking about is when you hit bumps, it could be a bad shock or brake pads missing the anti rattle springs. If the rattling noise is from the engine, it sounds like you may have preignition

...back to that mechanic. I got the "right way" picture from google image search from here... WRONG WAY (my picture) RIGHT

...anti rattle springs behind the brake pads in the caliper on that side . When pads are replaced there is a spring plate that comes with the pads or there are little spring clips that are fitted with ...

anti-rattle springs. Recompress the caliper piston all the way back into its cylinder. Flip the caliper back into position and reinstall the 14mm bolts. Of course, you need to purchase the replacement

...anti-rattle springs. Keep the springs separated, as they aren't interchangeable. Step5 Press the piston into the bore with a C-clamp. To prevent damage to the pistons, insert an old brake shoe in ...

anti rattle springs. Remove the brake pads and clean exposed parts of pistons using new brake fluid. Wipe away excess with a lint free cloth. Using a piston clamp, press each piston back into its bore

...or brick pads but it has been srvice new disk and pads gone only 5000 after service Sounds like the brake pads are rattling from improper installation or missing/broken brake pad anti rattle

...anti-rattle clips are left out or broken, this will cause a rattle in the wheel area, this was the case on my Corvette after the brakes were done by the used car lot were I gought the car, I put a ...