2004 Ford Crown Victoria "seal" Questions

Ad

Question about Ford Crown Victoria

2 Answers

**** main seal removal i got everything out of the way and now am having a problem removing the rear main seal from the engine does anybody know any tips or tricks please let me know.... If the seal ...

Ad

Question about Ford Crown Victoria

1 Answer

...the pan, clean all the old gasket material. Installation: Remove the rear main bearing cap oil seal Remove the timing cover oil seal Clean all the mating surfaces and seal grooves Install new

Ad

WHAT'S LEAKING? Is it the valve stem seals or piston rings??? Hi, I've got a 2004 Ford Crown Victoria Police Interceptor. When I pulled the #1 and #5 spark plugs, they were covered in oil. Is it the ...

Question about Ford Crown Victoria

1 Answer

out put seals i have a 1999 ford crownvic,,my transmission out-put seal popped out,, i replaced it. drove it for few miles, tranny started leaking again from the out-put seal. i dont know whats wrong,

...of the transmission what is and how I fix it step by step If its dark color it is likely rear main seal on engine. If it is red color it is front seal on transmission. check fluid levels,

Question about Ford Crown Victoria

1 Answer

output seal leak Ok Gotcha here we go Output Shaft has A Brass Bushing in tail shaft housing that supposed to minimize that Play the clearances vary but you R right Shouldn't be a lot of UP-DOWN Play ...

Question about Ford Crown Victoria

1 Answer

oil leak front seal front seal leak and cause the car to smoke under the hood For the seal to leak it must be either worn out..come out.. or the engine compression is so great that is the first place ...

...i turn the car on??? I tried fastening the bracket tighter but nothings working the valve will not seal WHAT HAPPENED? try turning the injector to and frow , if that do not work , you haveto take

Question about Ford Crown Victoria

1 Answer

leaking fluid from bellhousing if its leaking tranny fluid then the the seal is bad need to drop tranny and replace the seal

Question about Ford Crown Victoria

1 Answer

...lens over bulb should be held on by two crosshead screws remove these and remove lens with rubber seal. take bulb out replace and put seal and lens back on with ...

Not finding what you are looking for?
2004 Ford Crown Victoria Logo

470 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...