1996 Ford Aspire "egr valve port carbon" Questions

Ad

...egr valve off of the intake. the bottom port is exhaust pressure. the top runs through the lower and upper intake to just behind the throttle body. chances are the port through the intake is ...

Ad

...egr valve sits . use a small tiny tiny screw driver or old coat hanger clean out the hole then vacuum up carbon.put back egr valve. Also alot of time your egr port is clogged. Since ethanol was added ...

Ad

Question about Ford Aspire

2 Answers

...EGR VALVE NOT WORKING NOT OPENING UP OR EGR VALVE PORT STOPPED UP WITH CARBON BUILD UP NEED TO BE CLEANED OUT.SCAN VECHICLE SEE IF EGR WORKING OR YOU HAVE FAULTY PCM. NOx is porduced at high running ...

egr valve problem (exhaust gas return) egr position sensor. Take off the egr valve and turn it over and see if there is carbon build up in the ports, if there is clean it out with a pipe cleaner and a

egr valve take a piece of clothes rack or a tiny tiny screw driver carefully clean out carbon in the intake port hole on the intake.the carbon blocking off the egr valve.so it cant work properly.after

...egr valve for 2000 pontiac grand prix egr valve cost Hi Roneal,here's a EGR valve.Here's a second opinion. regular parts store about$80.00 dealership $200.00 when you get egr valve code make sure ...

...EGR valve, observed carbon build up in vacuum an exhaust ports. Started car, felt vacuum draw. Turned engine off, used metal coat hanger to dislodge carbon, only getting about 4" into vacuum port, ...

Question about Ford Aspire

1 Answer

...egr valve, egr selinoid, and sensor and check all hoses for clogs. reset check engine light still comes on after driving for a while CLEAN OUT THE CARBON INSIDE EGR PORT HOLE IN THE INTAKE MANIFOLD ...

...EGR valve insufficient flow. I have replaced the EGR (twice) and also replaced the M.A.P. sensor upon the advice of a service center. The light still came back on after about a week. What else can I ...

egr valve and cleaned ports, giving same code. I have replaced the EGR valve and cleaned the ports thoroughly but it is still popping the egr engine code. Anyone have any suggestions? When you say you

Not finding what you are looking for?
1996 Ford Aspire Logo

109 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Ford Aspire
1995 Ford Aspire

146 Questions

1997 Ford Aspire
1997 Ford Aspire

113 Questions

1994 Ford Aspire
1994 Ford Aspire

85 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...