...replace it. Otherwise, make sure it is well lubricated and that the striker on the pillar is positioned correctly. Make sure that the hinge pins are not worn either or door will mis-align sometimes ...
...More then likely, it is the lock latch. Sometimes you can just reset them. It may be stuck and need replaced. if the hatch wont lock make sure you have yout latch striker bushing. its only 15 dollars ...
...2004 Gmc sierra 2500 HD and need to find out what the bolts are that look like Strikers. I need to replace one and was told they were strikers but cannot find them anywhere. Are they infact called ...
im looking for a replacement hood striker. i need im looking for a replacement hood striker. i need the part that goes down into the latch to keep the hood closed. not the part that engages the safety
...do it for you ,not a lot of money for this as its only a 5 minute job sounds like these doors were replaced at one time recently. Were they
...4. Door latch may need "resetting" to the open position manually, and quite possibly need to be replaced. I hope this helps and is not dumb, it's what I'd
...replace, but on the pelier is where the striker at, that's the part where the door latch latches to, with a torx tool you can loosen it to align to the door latch. the striker will move up, down, in ...
Doors are very hard to shut on my 1988 Dodge ram I was told that the door jams needed replacing. What are door jams? Are they the knobs that are bolted to the door frame to catch the lock when closing
...What is actual name of that striker or catch piece on underside of hood, and how do I find one and replace it, or does it require professional tools and knowledge. have a look at it it may just be ...
...replace the striker plates. Once fixed the motor should last a good number of years. One pece of advice, clean the motor interior if you feel you have to but do not lubricate anything, it only ...
49 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions