1983 Ford Mustang Hatchback "hatch wont lock" Questions

...is the lock latch. Sometimes you can just reset them. It may be stuck and need replaced. if the hatch wont lock make sure you have yout latch striker bushing. its only 15 dollars on ...

...hatch wont lock I just got a new stero installed at Circuit City. When I got the car back the "Hatch is open" indicator came on. I cannot lock the hatch anymore. I can hit the lock button on the key ...

...hatch door wont lock or unlock.All other doors do with both key and inside lock.Hatch wont budge? There is a manual release on the inside of the hatch door. Somewhere in the center of the door under ...

...hatch wont open. I need to replace the tail light bulb and signal bulb on the drivers side. Anyway to get around fixing the hatch to change the bulbs? if not.. How can i get the hatch open? You can ...

hatch wont lock The locking mechanism may have been closed while the hatch was open. Try unclocking with the key or pulling the release lever while the hatch is up and then try closing it to see if it

...wont open? help.,. hi you need to get into the hatch remove the cover and remove the soleniod which operates the the lock [power side of lock] then shut the hatch see if it works by key it should ...

...HATCH WONT LOCK WONT LOCK WITH FOB / KEY OR DOOR SWITCH HELP I NEED TO LOCK MY HATCH sounds like you need to check the actuator take the trim panel off should be few screws and pull off the top and ...

haTCH WONT OPEN. DO NOT HAVE KEY. LOCKSMITH SAID I MUST TAKE LOCK OUT FOR HIM TO MAKE KEY. BUT i CANT GET HATCH OPEN If you can get the rear hatch trim off with the door closed, then you could release

HATCH WONT LOCK WITH FOB / KEY OR SWITCH REAR HATCH WONT LOCK WITH KEY/ FOB OR SWITCHES We had the same problem with our 99 explorer there could be two seperate problems , problem # 1lock mechinism is

...hatch wont lock. When you lock the car all the doors lock but you can still open the rear hatch I would guess that either the wiring to the hatch lock is broke, or the lock or linkage isn't ...