1995 Ford Ranger Supercab "special tool release belt tension" Questions

Ad

special tool Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in

Ad

...Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how ...

Ad

special tool Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in

Question about Ford Ranger

1 Answer

...change the fan, a/c belt will need a special tool for job.(belt tensioner pulley tool) release tension with tool on belt tensioner.then remove old sepentine belt,then install new belt using same ...

...still have to use the tool to install a new belt to move the idler pulley out of the way when it comes time to put tension on the belt You have to hold with a special tool or use wrench #15 or

Question about Ford Ranger

2 Answers

...pry on the tension pulley enough to release the tension on the belt.... A special serpentine belt tool. If you have a Autozone near by call them, the one down the street from me rents

...special wrench for tension pulley FOR ROUND BELT TENSIONERS YOU CAN USE A SOCKET WRENCH OR BOX END WRENCH TO TURN CENTER BOLT COUNTERCLOCK WISE TO RELEASE BELT TENSION.WHILE SLIP BELT OFF THE ...

...belt. this vehicle should have a serpentine belt and it will either be a 1/2 drive socket wrench or they make a special tool to release the tension-er and the tension er is spring loaded so be ...

Question about Ford Ranger

2 Answers

special removal tool to release the tension on the tensioner pulley. You can use a box-end wrench. I'm not sure what size it is but it's metric.It is a good idea to have 2 people to remove the

special tools needed, space seems really tight. MY solution was to remove the rain shroud underneath the car, and work from beneath. Route the belt over all the pulleys, leaving the tensioner for LAST

Not finding what you are looking for?
1995 Ford Ranger Supercab Logo

533 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...