1994 Ford Ranger Supercab "dash bulb" Questions

...dash doesnt work with hazzards or turn signals. Left is fine. changed turn tignal bulbs front and rear was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that ...

how do I remove dash enough to change bulbs in 2000 ford ranger? First locate the screws hidden above the instrument cluster . If the truck has a tilt wheel shift it downward and put the vehicle in ...

...dash. Its an extended cab 2 wheel drive 5 speed 4 cyl if any of that matters. You have to remove the instrument cluster in order to replace the bulbs. This will include removing the knee panel under ...

dash light out how do you replace the dash lights in the 1994 ranger? ok the dash has to come out and the bulbs are back light there behind the dash board

turn signal is on the dash indicator blinks very fast. I have replaced the turn bulb in the assembly. perhaps its the wrong bulb or the bulb isn't incerted correctly, had this problem on my moms truck

...trim (5 screws-3 top and 2 bottom) Unplug headlight switch and dash dimmer switch Remove 4 cluster screws and from behind unplug 3 plugs Acess dash lights by turning black bulb holders ...

...i suggest replacing them all. if you didn't buy the truck new then someone has took the bulb out cause it was on when the sold the truck or the bulb it just bad you can take the dash out and check ...

dash lights burn out. what do i have to do to replace the dash lights on speedometer take the insterment cluster out and access the bulbs from the back side

dash lights will not come on. bulbs are good and specific ''dash lights'' fuse found. Panel can be luminated by powering directly then there's the 'tail-lamp' relay to consider.