...2003 Ford Explorer when using rear Heater/AC controls. some thing is proberley in the blower motor or fan does the ticking go faster when the fan speed is turned up if so replace the rear blower ...
...rear blower fan works but no warm air I can hear vacuum lines trying to work was an intermittent problem now no fan or hot air Find and replace the blower resistor. I believe your resistor is under ...
Question about Ford Explorer
...rear fan worked fine this afternoon I cranked up the car and the heater fan worked fine. when I got to work tonight and cut the car off the heater fan stayed on I had to pull the fuse to cut it off ...
...rear only Heater or blower. If it is the blower, then replace the blower resistor. Beside the blower under the dash on the passenger side. If it is the heat, then the system needs cleaned out or ...
...Replace the rear heater core. Attach the heater hoses. Make sure no air is leaking from the left upper housing and the right upper housing fitting and from the upper housings and the lower housing ...
Question about Ford Explorer
...rear window heater not working these fuctions on my 2005 hyundai atos do not work, but the fuses are not faulty There are a few possible causes for the air conditioning blower fan, horn, and rear ...
replace the blower resistor when the blower works only on the MAX/Highest setting." -- begin excerpt from 2001-2 Acura 4wd 6cyl MDX Repair manual -- Control Assembly Removal & Installation 2001-02
...replace the heater core 1997 isuzu hombre See me at website for images can only send one through this channel. www.autorepairhelp.us Best Regards, Master Tech Lee HEATER BOX SHIELD Image Heater Box ...
Question about Ford Explorer
...rear.But the fuse for the front blower is in the under hood fuse block.If this is good then The problem is probably the resistor module.It is next to the blower motor.The connector from the resistor ...
...replace it? Thank you Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004 Blower Motor - Removal & Installation Disconnect and isolate the negative battery cable, then wait 2 minutes ...
1,541 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions