Question about Ford Ranger
...brakes the turn signal lights stop flashing and stay on until I take my foot off the brake...then they flash again... All of my bulbs are working. The left turn signal works properly... Flasher Unit ...
Question about Buick Cars & Trucks
...light works as well as front signal lights. No rear brake lights or turn signals. Tail lights and headlights and third brake lights works. Bulbs good. Help Stop Lamps The brake pedal position sensor ...
...light switch Stop Lamps The rear turn signal lamps are also used as the stop lamps. The TURN/HAZ fuse in the instrument panel (I/P) fuse block supplies battery positive voltage to the body control ...
turn signal stop blinking when brakes applied turn signal stop working when brakes are applied Chick ground at light fittings. Your turn lights are grounding through stop light bulbs
...brake. Then resumes clicking when I release brake pedal. when I press down on brake, left turn signal acts like a brake light. All bulbs are fine. i think the bulb is backwards or wiring is ...
Question about Pontiac Cars & Trucks
signal reaches a voltage threshold indicating the brakes have been applied, the BCM will apply battery positive voltage to the stop lamps, transmission control module (TCM), engine control module (ECM
...signal back to the BCM that will increase as the brake pedal is applied. When the brake pedal is applied, the BCM will then apply battery voltage to the left and right stop lamp supply voltage ...
Question about Pontiac Cars & Trucks
...signal reaches a voltage threshold indicating the brakes have been applied, the BCM will apply battery positive voltage to the stop lamps, center high mounted stop lamp (CHMSL), transmission control ...
Question about Cars & Trucks
light up at all? is it both sides or just one if you tell us this we can and will help you. Thanks Mike L. Park lamps or running lamps are on a different circuit then stop lamps an turn signals . That
Question about Ford Ranger
...signal is applied from the brake pedal position sensor to the EBCM through the brake sensor signal circuit. The fuse block left rear supplies battery positive voltage to the bass relay switch through ...
303 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions