1999 Pontiac Montana "remove seat belt retractor" Questions

...Seat Belts. Remove the upper cargo net retainers. Refer to Cargo Net Replacement in Body Rear End. Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement . Using J 38778 remove ...

...seat and remove two bolts in the center of each seat back striker plates. Remove two bolts from outboard rear seat back frame retaining brackets. Lift seat back up and pull forward to remove from ...

...seat. Remove adjuster cover. A Slide floor anchor cover. Remove floor anchor bolt. B Remove shoulder anchor bolt. C Remove front and rear kicking plate, then remove center pillar upper and lower ...

...seat belt retractor on 1999 Ford Taurus? It will not pull out.... you may have to remove the bolt that holds the buckle to the floor. Try to push the belt into the retractor and see if it frees up. I ...

seat heater, remove the harness band (A), and disconnect the seat subharness connector (B). If equipped without seat heater, detach the seat belt switch connector clip (C). Detach the seat belt buckle

seat belt retractor so i can release the belt? of course it possible to access this retractor , you just need to locate the small round circles in the lower part of trim and gently pry the covers off

seat apart and changing the retractor? and it would caost almost $400 bucks is there anything I can do to fix it? get a retractor from a salvage for half price, you need like a torx 50 or 55 to remove

...seat belt and try to remove any debris that you find. Check the seat belt latch: The seat belt latch may be faulty or stuck, causing the seat belt to become stuck. You'll want to check the latch for ...

...the springs inside the seat belt retractors wear out over time. remove the trim from over the retractor and make sure nothing is rubbing the belt, and if it all looks alright, replace the seat

...remove the plastic seat belt retractor covers, on the floor by the "B" Piller If you need to replace them, the retractors I mean, there is a special GM Torx Driver Bit for seat belts I would play ...