1999 Pontiac Montana "master cylinder replacement" Questions

Ad

...and fluid is full. one thing I did notice, is when you step on the brake pedal the fluid in the master cylinder or air is being pushed out. Master cylinder needs replacing . the spring need

Ad

...try everything else we could think of. Any help would be much appreciated. WHAT ABOUT ADJUSTMENT ROD BEHIND MASTER CYLINDER /WAS BORE ON MASTER CYLINDER THE SAME OR YOU COULD HAVE BRAKE HOSE ...

Ad

Question about Pontiac Montana

1 Answer

...master cylinder. If both of these are fine it might be that the rubber seals in the booster are nearly stuffed and need replaceing there should be four small seals and if they are leaking you will ...

Question about Pontiac Montana

3 Answers

...master cylinder on a 2001 Pontiac Montana FWD we pre bled the master and bled both front and rear brakes but the pedal wont get stiff it pumps up but doesn't feel right then when we start the van the ...

Question about Pontiac Montana

1 Answer

how to replace a vacuum booster how do you get the old booster out? After you disconnect the master cylinder, you disconnect the  rod from the brake pedal and unbolt the booster from the firewall

Question about Pontiac Montana

2 Answers

...kit through the unit. A rebuild kit should be purchasable through your local parts shop. Master cylinder and the booster. Booster bolts go through the firewall just above the gas and brake

master cylinder and used a power bleeder to bleed the brakes. The brakes still have the problems - 1) does not feel like rear brakes are being applied hard enough to do any stopping 2) if you continue

Question about Pontiac Montana

1 Answer

...master cylinder. what is the relationship between it and the power steering? If you have a hydor booster the power steering pump runs your power brakes, make sure power steering level is at max, to ...

...master cylinder in my 1994 pontiac bnneville? How hard/easy it it to replace myself. I can purchase ne for around 50-60 dollars. Yes it is not that hard to replace. REMOVE OR DISCONNECT Retainer and ...

master cylinder will not pump any fluid. it seems like the master cylinder is not pumping any fluid. Here are some possible reasons why this could be happening: Air in the brake lines: If there is air

Not finding what you are looking for?
1999 Pontiac Montana Logo

728 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...