1999 Pontiac Montana "amp" Questions

...the exhaust converter checked for blockage? I would say there was not enough diagnostic checking & testing done, when the vehicle was last worked on Shops pick & poke & guess &

...we only have liability, no comprehensive coverage, and it messed up my drivers side headlight & turn signal & a piece of the grill. My husband fixed the headlight & turn signal & ...

...regulator retaining screw (retain for re-use (5) using a shop towel to catch spilled fuel, lift & twist Fuel pressure regulator to remove it from the fuel rail. (6) remove/discard retainer and ...

starter dosen't work Try to see if the connections on the battery are clean an shiny and wire brush vigorously if necessary. Reconnect and get an inductive ammeter to measure how many amps are flowing

...videos on this? That is done with a special module called a J2534 ,that goes between your vehicle & a scan tool In most cases it is done by a dealer Any shop with a J2534 can do it,if they are ...

...The most inexpensive cure is to replace it entirely. I've gone to dealers to buy small parts & paid more for the small parts than the entire item costs elsewhere. I didn't of course call ...

...doors. There are 2 fuses if your vehicle is equipped with the right side only. There is a 20 Amp fuse - this provides power for the Sliding Door Control Modules and a 40 Amp fuse for each

...regulator assembly as well because the cables often fray and cause problems as well. Open the door & try wiggling the harness while pressing the window switch to raise the window. If the window ...

...fuel pressure at the fuel rail what it should be? Sounds like your just changing parts in a wish & hope strategy & not diagnosing a thing The cam sensor code should have told you why is was ...

...a failed exhaust converter on bank #1 side of the motor Seeing as how they last 12 to 14 years & yours only 8 years, you have had class A cylinder misfires, most likely for years & that ...