2000 Nissan Frontier "stuck timing belt tensioner" Questions

...down highway everything just fine then engine stalled and never started found out the tensioner for the timing chain stuck causing engine to jump timing check top tensioner that keeps your chain ...

...timing idler pulley, balance tensioner pulley, and the hydraulic tensioner pulley and now im stuck, for the noise still persists. what should i do? The fan belt is probly worn or dirty. Try cleaning ...

...timing belt off of the cam drive sprocket and off of the water pump. 6. Remove the water pump retaining bolts pictured and remove the water pump. The pump can often be stuck in place. A screwdriver ...

...belt? You most likely have a pulley not working correctly either it is stuck or the bearing are damaged and jerking it to a stop braking the belts. Another scenario is not being tension correctly or ...

...stuck trying to remove the tensioner pulley.. is there a special way to remove the pulley? You mean the serpentine belt, The timing belt is under the timing covers and is a bigger job. You would be ...

...engine a few times to make sure you have compression and engine turns without getting stuck. See link below good luck. ...

Timing belt tensioner stuck in tight position A friend of mine has a 2001 Chevy Venture that had a squeaking timing belt and without knowledge of automotive. So he began to replace the belt with the ...

...Timing belt/chain tensioner damaged An improperly torqued crankshaft balancer A mis-built or mis-timed engine A loose or missing crankshaft balancer bolt The CMP actuator solenoid stuck open The CMP ...

...stuck out in mountains with broken fan belt . she picked up a belt but doesent know if she has the right one or how to put it on few tools and some help is available how do you replace it? IT SHOULD ...

...stuck Not sure about your specific make, but generally there are two bolts on a tensioner unit. One bolt holds the spinning pulley to the tensioner, and the other holds the whole unit to the front of ...