2000 Nissan Frontier "replacing ignition switch" Questions

...ignition switch assly When you say switch do you mean the key cylinder assembly or the actual ignition starter switch that the key operates?? James, Check the attached links,instruction and guides on ...

replacing the ignition switch for a '98 Nissan Frontier. One day the truck kept running with the key removed. Another, it was making noise intermittently while parked in my garage with the key removed

fine. I have replaced fuel pump, fuel filter, distributer, spark plugs & wires. When it fails, test for spark at plugs and fuel pressure. Could be ignition module, ignition switch, loose ground, other

...ignition switch, and how do I do it? Sometimes the battery will drain when truck is turned off and parked for a few hours. Other times it will be fine. It seems to happen in cycles for some reason. ...

ignition switch, and from the ignition switch it goes through a safety interlock circuit which is different for automatic and manual transmissions. Automatics have "neutral safety" switches that break

ignition is turned off. This happens when the brake light switch is out of adjustment or broken. It is mounted on the brake pedal rod just above your foot. Check to see if the nut has come loose on it

will not start w the key but does start without a problem w autostart. started 2 years ago with occasionally needing to turn key several times before starting. then a year ago occasionlly needed to us

...ignition switch. Hi! have you check the emergency fuses? there are fuses under the dash board by the left foot driver seat or in the glove compartment, and there is also control box fuses and relay ...

battery. Turning the ignition switch several times before it will start. Replaced old battery.96,000 plus miles on it. Starter exhibits the same problem.. intermittent engine start after several tries

...me cleu. please help Hello. Replace the ignition switch and you may solve your problem. Since it is on again and off again it is difficult to be sure but for the cost....I would replace the switch.