2004 Ford Expedition "service light reset" Questions

How do you reset the service light on ford expedition you need a scanner to reset service engine light but it will come back on until you fix the problem

...light stays on after the service has been done. How to reset it It can be reset by using the code scanner or by disconnecting the battery for several minutes. HOWEVER, I suspect that something is ...

...then fix. Whoever changed the oil last, did not clear the service light. Unhook battery for 3 minutes snd that will reset your computer and light should go out. Then go to autozone and have codes ...

...service engine soon light came on this morning as i was leaving for work. Its not cold here or anything and i had the oil changed and a new fuel filter installed about three weeks ago. What could be ...

light. thanks in advance for your help. 1.) Press the TRIP/RESET button to cycle to "SETUP MENU HOLD RESET". 2.) Now press and hold the button for 2 seconds until "RESET FOR SYSTEM CHECK" is displayed

...service life and replacement will be necessary. You may try to reset it to by removing the positive battery connector, letting it sit for at least 5mins. then reconnect it again. This will reset the ...

...Service Engine Soon light is still on. Is there any way I can reset the system without having to take it in to see if the light comes back on? the light is on for a reason. resetting it is bad. i ...

...service life and replacement will be necessary. You may try to reset it to by removing the positive battery connector, letting it sit for at least 5mins. then reconnect it again. This will reset the ...

...service engine soon light came on. I went to Autozone for them to read the codes...it came back O2 sensors, ignition misfire, and fuel injector problem. Ocassionally, I will have white smoke coming ...

misfire on cylinder 3 misfires and service engine light on my 2002 dodge intripid replaced spark plugs and switch coil packs. reset and light comes on after a few miles check fuel injector