...flickering battery light and abs light come on for a few seconds amd the outside temperature gage flicks off and onfor a moment check battery connections , and also check wiring going to ...
????HELP Recharge the battery. Then after it is recharged it should start. Then have the alternator checked
Question about Ford Expedition
...gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this ...
...gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this ...
...check engine light is still on and the gage keeps reading in the hot zone and the little oil can icon keeps coming on.I just had an oil change 2 wks ago.it runs and idles ruff,stalls.I dontknow what ...
Question about Ford Expedition
...the turn signal on, it is getting ground through the turn signal circuits. You need to be checking all the ground connections, starting with the battery cables and engine grounds. It ...
...Check engine light on at all? did you do a fuel pressure test? or did you just push in on the valve on the fuel rail and gas came out? if thats all you did, that will not tell you anything.you GOT to ...
...gage sending unit--an expensive and laborious R&R job. If the pump is working, you should hear it at least momentarily when the key is turned to the "on" position. If the pump is not working, the ...
Question about Ford Expedition
on the internet you would probably be wise to double check. All databases are not created equal. You might be able to use analog gage in place of oil pressure sending unit to double check oil pressure
1,474 questions posted
Usually answered in minutes!
2,188 Questions
1,825 Questions
1,627 Questions
1,696 Questions
1,161 Questions
