Question about Ford Explorer
door latch assembly There really aren't any directions. If it is the door latch remove the door panel. Remove the rod that connects it to the door latch assembly. Remove the nuts that attach the latch
...door latch-Explorer Rear door latch-Explorer Remove the door trim panel and watershield. Disconnect the rods from the handle and lock cylinder, and from the remote control assembly. Remove the latch ...
...door. How do I acess the latch mechanism? The latch works when I apply pressure but nothing happens. The electric locks seem ok. You will need to remove the panel from the inside of the rear door and ...
...The panel will come off after you remove the phillips head screws by the door latch and armrest. It is held on by push pins. A small prying tool will be necessary to avoid breaking them or the
...door and dont know how to get the mouldings from interior off to see whats happened thanks debbie Check that headlamp switch (11654) is in the off position. Lift hood (16612). Release latch and swing ...
Question about Ford Explorer
...door wjile you try to open it. it needs little force. what happen is the catch is off align, when you moove the furnitures. you have to look at the lock and figure out how much is off and correct it. ...
...door open in order to remove panel. They had to remove the driver's seat (working from the backseat!), and it was rather labor intensive! The latch assembly was only $58, but labor ended up $220 ...
DOOR WON'T SHUT... THINK THE LITTLE LATCH THING IS BROKE, HOW DO I REPAIR? did you try lubing it with some lithium grease as most of the time, it's just something rubbing. If that doesn't work, you'll
3,360 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,302 Questions
1,513 Questions
1,369 Questions
