1998 Ford Expedition "drive shaft" Questions

Ad

...shaft underneath As soon as start to drive I feel some hesitation and a noise as if something is stuck somewhere. I think it comes from a U Joint between the two shafts underneath. Anyone with any ...

Ad

...drive shaft out of balance ujoints are worn *steering bars are worn or need tytening curb checking your rims this can lead to unbalance *one or more of your tires have lost there balancing bars that ...

Ad

Question about Ford Expedition

1 Answer

if your drive shaft is making clunking noise do you have to change the whole drive shaft no, universl joints are all that need to be replaced

Question about Ford Expedition

1 Answer

...drive shaft and remove the tail stock seal(there are install and removal tools but a hammer and a screwdriver will remove it nicely)then replace with new seal (if you don't have the install tool a 5" ...

Question about Ford Expedition

2 Answers

...drive shaft came off need to fix how? The answer to this depends on exactly what happened. Typically a universal joint fails and drivers fail to get it repaired. This situation is a ROLL OVER danger, ...

drive shaft but it's drive like it's in 4wd. The button is set for awd is there anything that can be done with it until I can find a drive shaft? Unfortunately No, the System was designed for the Rear

Question about Ford Expedition

1 Answer

...drive line shaft (tail shaft) check the u-joints for a rust streak around the cross and cups. They u- joint goes dry and will squeak as the joint goes through the angle of drive. If you have a front ...

drive shaft, could that cause it from not wanting to go into overdrive? It acts like it's missing when it tries. IF you are saying that the rear drive shaft is missing then you should have it replaced

Question about Ford Expedition

1 Answer

...drive shaft broke on my99 expedition 5.4 with4x4 so I replaced it then my rear end started lockin up so I replaced it now my reear wheels roll then lock up,roll then lock up, any ideas? u need to ...

Question about Ford Expedition

2 Answers

job of tightening the blade and arm to the shaft. Look at the assembly where the big round bit that drives the arm goes into the body. If it's not missing, remove the round cover, You'll see a

Not finding what you are looking for?
1998 Ford Expedition Logo

2,492 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,149 Questions

1999 Ford Expedition
1999 Ford Expedition

1,788 Questions

2003 Ford Expedition
2003 Ford Expedition

1,655 Questions

2001 Ford Expedition
2001 Ford Expedition

1,133 Questions

1997 Ford Expedition
1997 Ford Expedition

1,022 Questions

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...