1997 Ford Crown Victoria "brake bleeding" Questions

Ad

Question about Ford Crown Victoria

1 Answer

...bleeding operation, DO NOT allow the brake master cylinder reservoir (2K478) to run dry. Keep the master cylinder reservoirs filled with High Performance DOT-3 Brake Fluid C6AZ-19542-AA or DOT-3 ...

Ad

Question about Ford Crown Victoria

1 Answer

bleeding) but my brake is very soft (when brake pressed softly, it goes all the way to floor without stopping). Only way to stop is to press the brake very abruptly. I need to bleed lines by the tires

Ad

Question about Ford Crown Victoria

1 Answer

brake pedal stuck 1995 crown vic lx i change the rear driver side brakes and now the brake pedal is stuck to the floor. the car is turned off but my brake lights are stuck on. how can i get my brakes ...

...bleeding back into the master cylinder.  I suggest a flush with new fluid first, then bleed the system, starting first at the antilock, the the right rear, the left rear.  This is a common ...

...bleeding,and testing Which brake line? For instance, the flexible line that runs from the car frame to the caliper and is very accessible and easy to repair? Or, say, one of the metal lines that run ...

Question about Ford Crown Victoria

1 Answer

brake pedal stuck i have a 1995 ford crown victoria lx, i changed the rear driver side brakes and now the brake pedal is stuck to the floor. the car is turned off but my brakes lights are on. how can ...

Question about Ford Crown Victoria

2 Answers

bleeding brakes on 1986 crown victoria fill mastercylinder w/brake fluid,leave top off,then open all bleeders to all 4 wheels, leave open until u see fluid dripping,then make sure master cylinder is ...

Question about Ford Crown Victoria

1 Answer

brakes have hardly any pressure my brakes have hardly any pressure. the pedal goes almost all the way to the floor. I'm driving an 88 ltd sounds like there is a leak in the system or you need to bleed

Question about Ford Crown Victoria

1 Answer

Can I bleed my 94 Crown Vic brakes with out special equipment? I have bled several older brake systems on my vehicles without ABS systems in the past. Thanks Jim I have done the brakes many times on ...

Question about Ford Crown Victoria

1 Answer

need to bleed my front brakes just changed the front brakes and rotors, please show me how to bleed the font brakes if you change your brake and rotor you don't have to bleed your brake

Not finding what you are looking for?
1997 Ford Crown Victoria Logo

393 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...