1995 Ford F350 "sending unit" Questions

location of temp sending unit 02 f350 diesel cant find temp sending unit location on engine coolant or oil? heres a diagram

sending unit replace and when turned on will pop and go back to hot Would you mind claifying this a little I don't know exactly what you are asking or saying here. I mean what gets hot and what ...

next The only other things would be the gauge itself or the wiring to and from the gauge to the sending unit. Make sure the temp sending unit was changed, not the coolant temp sensor, for the computer

sending unit and fuel pump changed the fuel guage went to 1/4 and sat there. Any tips? Fuel guage wont work. I'm assuming this has dual tanks, do you know if it is not working on both tanks ? 

sending unit is employed to tell the gas gauge how much fuel is stored in the tank. In your Ford vehicle, the Ford fuel sending unit is usually made up of a metal rod, a resistor, a float and a wiper.

...sending unit down use a hammer or dead blow hammer and a punch to knock it counter clockwise. The sending unit should pop up, save the rubber o-ring that is under it as you will reuse it unless the ...

When replaced the fuel send unit the fuel gage sits on empty I replaced the fuel send unit in my f 350 with the 6.9L 1986 and the fuel gage will not work. replaced it with a ford part and still can ...

...sending unit and test the oil pressure. If oil pressure at idle and 3000 rpm's is a-ok via spec's ( big money repair items) then its either the gauge a clogged or defective sending unit or the ...

1994 f350 7.3 idi turbo diesel location of oil pressure sending unit on the 7.3 idi , the oil pressure sending unit is mounted on the oil tube on top of the turbo. that is if it is the original

...float or sending unit. The rear tank works fine. The input lead to the sending unit should read 8 Ohms if good. If not replace the sending unit or live with it for they are expensive if purchased ...