2000 Dodge Ram 1500 Truck "air compressor pressure switch bypass" Questions

air. I have put refrigerant in the system, and the pressure is fine. The compressor is not kicking on, but it is still getting power. I have been told it could be a high or low pressure switch or even

...Compressor will compress both Freon and Atmospheric air. Your efficency drops when the Freon is displaced by Atmospheric air. You will need to find the leak in the system which is allowing Freon to ...

...air, compressor not coming on Air conditioner in grand caravan blowing hot air. Tried to put refrigerant in it but compressor not coming on. Check the fuses/relay for the compressor. If good, bypass ...

...air. I checked the compressor and it wasn't spinning with the air conditioner turned on. I bypassed the AC compressor relay with a paperclip and the compressor started working properly and ...

...compressor cycling switch, most common problem. ACDELCO Part # 155606 {#96069320} SWITCH,A/C CYCLING Most systems have a high and low pressure cut off switch.It could be one of the switches are bad. ...

air and snowflake button blinks when pressed Blinking or chattering of the compressor clutch usually indicates low "freon" charge. could be 3 things. 1. ac compressor is no good. 2. hi pressure switch

...air..could the pressure switch be bad?? If so how do you know? is the compressor coming on,ie clicking on and then turning,have a look My A/C is not working properly when set on cold setting warm air ...

...air! Charge shows good with recharge hose from Auto Zone. A/c switch not turn system on. Check the switch for continuity. It should be signaling the pcm to turn on the compressor. Also check the low ...

...air without any warning or strange noises. The compressor does not engage. The green a/c switch light comes on, the blower works fine, the a/c relay (in fusebox) clicks, I jumped/bypassed the triple ...

...air conditioner clutch wont engage, it works i hooked a direct line to it, Seems to have enough pressure in the line, checked that with a gauge also, if i bypass the low side switch perminately will ...