1988 Dodge B250 "set timing truck" Questions

...set it back to the correct timing mark. Does any body know what that is? I have been told that I can't, why not? there is a mark on the crank for timing. If you have a timing light hook that up and ...

1988 dodge 350 van 360 V8 When is is hot(not 1988 dodge 350 van 360 V8 When it is hot(not over heated) several times it would not start and one time it just died in the middle of the street. When I ...

...set timing on my 91 nissan truck To set the timing on your 1991 Nissan truck, follow these steps: Locate the timing marks on the engine. They are usually located on the front of the engine, near the ...

set base timing on 1999 escalade The base timing can be set by lining up the timing mark at TDC for cylinder 1 with a timing light. The truck may still run badly because the ECM will need to be set to

setting the timing with a light ? if you are setting the timing it should be set at about 10 before top dead center or maybe would run a little better at 12 or so thanks jerry holler if you have more

Set Timing to 4 degrees btdc. When I reconnected my bypass connector the mark on my damper should have move dramatically, IT DID NOT MOVE AT ALL. what would cause this to happpen? set it at 12 degrees

set the clock on 91 gmc truck. Battery was replaced and I need to set the correct time. With the radio off, hit set then use the scan and seek buttons to set the time. When you are done, hit the set ...

...set the timing on your truck. It is completely controlled by the ecm. The only way to correct any timing problems is to have the ecm reprogrammed. I hope this has been helpful. Please leave a good ...

...on a 2002 jeep grand cherokee how do you set the timing on a 2002 jeep grand cherokee You cannot set timing on the car. The distributor cannot be moved. how do you set the timing on jeep laredo

...set timing? Engine timing ' Japanese Mini Truck Forum minitrucktalk.com > Forums > Japanese Mini Trucks > Suzuki Carry Feb 12, 2014 - Found some info with misspellings and possibly incomplete ...