1988 Dodge B250 "318 distributor wiring" Questions

...318 4x4 distributor firinng order wiring diagram ram 1500 318 engin 1998 1-8-4-3-6-5-7-2 Clockwise rotation. #1 should be marked on the cap. GO TO THE LINK BELOW FOR INFO U NEED. ...

...318 #1 is at 6:00 o'clock on the distributor when you are looking at it from the front of the car. It turns clockwise and the firing order is 1-8-4-3-6-5-7-2. Odd cylinders are on the driver's side ...

...318-from plugs to distributor. I tried to copy the old wires positions but it doesn't run right now See the link. A 318 is a 5.2 is the same for all years. Firing order for dodge durango 1998 5 2 ...

I need the distributor wiring order on a 1990 dodge ram 318. Is it the same as a 1986 318 ? Thanx 1-8-4-3-6-5-7-2

...318 intake, and 360 fuel rails? Question #3 We tried to adjust the timing by turning the distributor cap but could not get rid of any of the problems. Do we have to disconnect the computer from the ...

...318(m40) you don`t say what year this is so I will guess this has a distributor, check for power at the ignition coil and coming out of the coil on the wires. then check for spark coming out of the ...

...318. Replaced stock distributor w/ an HEI. Only two wires on it. Stock one had three How do I connect it to my TBI? So it will receive pulses? Injectors shut off after a few seconds now, worked ok w/ ...

...distributor cap. Car is a 1988 Dodge 318 ci TFI. How to find the #1 post on cap check out the link for the firing order. Lots more on the Images tab. Number 1 on the distributer cap is at 11 o'clock. ...

...318 died. Getting good fuel pressure has fire but iratic replaced crank sensor and distributor stiil won't start just spins checked relays... Good no codes are stored recheck distributor possible ...

...318-1 I have lost the information that shows where to connect the spark plug wires from the engine into the distributer cap For this you have to determine when the #1 cylinder is at TDC (Top Dead ...