1988 Dodge B250 "318" Questions

what do I replace when a code 11 is sensed on my 91 B250 318 Code 11 means no rpm reference at pcm(engine computer) you probably need to change the pick up coil, located under the distributor cap. Won

i need to no where my igniton control module is located at on my 1992 dodge b250 it has a 318 You have a hall effect pick up coil, it is in the distributor, under the rotor-it has a 4 wire harness ...

1989 Dodge Truck B250 Van V8-318 ignition control module location? its built into the ecm located right in the middle of he firewall from under the hood, big black box with two plugs. its built in the

no power on hills and high gas consumption . Dodge 318, 1988. Happened to me. You need an injector for the tbi. one is bad the other is working which means the motor is only getting half the fuel it ...

ignition problem 1988 doge ram conversion van. 318 v8. When it does start, it stars and runs fine. But, usually it will not restart for a few days, then, miraclously, it starts again. Suggested ...

318 motor, fuel injected. starts and runs for time at idle. If I give it gas it coughs and sputters. A couple of times I turned the key until it made the buzz. Id id this several times until it didn't

was driving home in my 85 ram with 318, blew radiator hose so replaced it, now wont start and think it jumped time, have fuel fire and air, just doesnt want to start. Yurn the engine over by hand ...

1990 dodge b250 318 tbi... pulled codes from ecu... results= 12, 21, and 55. Fuel system is very rich causing flooding and stalling. I would appreciate any input you can provide. I also had a problem ...

what transmision is in a 1990 dodge ram van b250 with a 318 moter? You will have to refer to the id on the pan or on a tag on the transmission. There is the 727,904,and the 999.

I have a 94 dodge ram van / 318 w/ 360,000 miles. My headlights are starting to go off by themselves . Sometimes flicker off for several seconds , then I will push the switch off then on the lights ...