2004 Dodge Ram 1500 "install pushrods" Questions

Ad

Question about Dodge Ram 1500

1 Answer

What's your problem?installing heads trying to align timming marks place crank at TDC. turn cam until all the valves over number one are closed. your valve train will now be in time. however there

Ad

Question about Dodge Ram 1500

1 Answer

fix brake switch on a 1997 chevy tahoe Stop Lamp Switch Removal & Installation To Remove: Disconnect battery negative cable. Disarm the air bag system. Using snap ring pliers, remove pushrod ...

Ad

...pushrods To install: Lubricate all the valvetrain components with engine oil.Install or connect the following: Pushrods and the rocker arms. Torque the bolts to 24 ft. lbs. (32 Nm).Rocker arm cover ...

...pushrods are 6.875''. You may be able to use them,there should be enough adjustment to make them work.FordMotorsports and Crane make a pushrod that is 8.640 which is what I used with those rockers.To ...

Question about Dodge Ram 1500

1 Answer

how to install breck booster brake. fsm book, install. On vehicles with an adjustable pushrod, adjust the brake booster rod so the measurement between the booster and the centerline of the clevis hole

...sure they rest on tappets properly , install lifters on pushrods , then assemble cam making sure line and match marks allign . You may have to remove valve cover to properly install push rods

...pushrods are all the same length, but depending on the stroke each cylinder is on the pushrod may be in a different position. you are assuming that every pushrod should be in the rest state. that is ...

...pushrods are all the same length, but depending on the stroke each cylinder is on the pushrod may be in a different position. you are assuming that every pushrod should be in the rest state. that is ...

...Have you adjusted the pushrods properly?  Pushrods generally need to be adjusted after installation.Not sure how to do this on this model, although I own a 94 Ford Explorer with the V6 ...

Question about Dodge Ram 1500

2 Answers

pushrods in a row exactly like you removed them and work backwards to install them if you want each pushrod to set with its original lifter. if you look at the intake valve and that exhaust valve, the

Not finding what you are looking for?
Cars & Trucks Logo

2,887 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...