2004 Dodge Ram 1500 "bolt torque" Questions

...Torque the long horizontal bolt and vertical bolt to 41 foot pounds and the short horizontal bolt to 55 foot pounds for a 4.7 L engine. Torque the mounting bolts to 30 foot pounds for all other ...

its an 02 how do i check the torque convertor or flex plate bolts to see if that is were my noise is coming from The inspection cover is usually plastic, it is bolted to the under-side of the ...

...bolt. Refer to Torque Specifications. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications There are two ...

...fom the motor and i cant get the trasmisson to drop...could thi be because the torque converter is bolted to the fly wheel? yes and how do you have it supported right now. if you are trying to ...

...for the throw out bearing? From 2001 Dakota FSM with same setup (3.9L V6 with NV3500): Flywheel bolts: 55 ftlb Pressure plate bolts: 30 ftlb Transmission front bearing retainer bolts: 5-7 ...

I need to know what to torque the valve cover bolts in ft. lbs.? The torque is different for each engine type. You can find specifics torque specs, and a lot more, by registering for free at ...

i need all torque specs main bearing caps i need all torque specs main bearing caps ,conrod cap, head bolts,etc for 2004 dodge ram 1500 slt haynes manual is the best way

Looking for a torque spec on a 2004 V-10 Harmonic Balancer Bolt in a SRT-10 Pickup torque specs for the harmonic balancer

Need to know torque for harmonic balancer bolt for 1998 Dodge Ram 1500 5.9 engine? the torque should be 150-180 ft lbs.anywhere in this range is good.

...bolt head is seated. Perform the differential bearing preload and adjustment procedure. NOTE: Be sure that all bearing cap bolts are tightened to their final torque of 136 N·m (100 ft.lbs.) before ...