1987 Dodge Ram Wagon B250 "switch" Questions

Ad

Question about Dodge Ram B250

2 Answers

i have a 91 dodge van b250 i have replaced the head light switch and the dimmer switch and checked the fuses but the high and low beams do not work Hi, assuming your parking lights work, I would say ...

Ad

Question about Dodge Ram B250

1 Answer

...starting to go off by themselves . Sometimes flicker off for several seconds , then I will push the switch off then on the lights will come back on . The problem is getting worse The newness of your ...

Ad

1989 dodge dakota no headlights dashlights or any other lights i changed the switch and it still the same way could it be the ctm causeing this and how i find it and change it You have two fuses ...

Question about Dodge Ram B250

1 Answer

...wireing for a Dodge 1987 B250 Van for the revirse lights from main connection and from transmssion switch van goes in revirse but no back lights work I put new bubs in same problem Really dont need ...

...you sure its not electrical and the curse control is not giving you trouble? Mine had multifunction switch was not working and the headlight switch burned up. I also found out that Audi had problem ...

Question about Dodge Ram B250

1 Answer

dash lights arn't working. burnt bulbs? light switch? Need to remove dash cowling/cover in order to fix lights? Marc Normally, when the dash lights are out, so too are the tail lights. Check your tail

Question about Dodge Ram B250

1 Answer

...Any help would be appreciated. Thanks. Bill Alaska replaced 9v battery but cannot find reset switch hello, if you have a vacuum pull off choke, you can try replacing your thermal vacuum valve ...

Question about Dodge Ram B250

2 Answers

...shifter, you will find it. This part2 people. one is under the vehicle, ready to move the Neutral switch, the other is holding the keyswitch all the way to "start" move the neutral swich. If this ...

Question about Dodge Ram B250

1 Answer

...different gears as I steer, it's so loose now. Have the steering wheel off, but how to get past the switches and ignition to tighten it ?? Pete, Long Beach the only switch that you need to remove is ...

...one time it just died in the middle of the street. When I tried to start it ,it would run when the switch is in the starter position and die in the run position.After the van sets for awhile ...

Not finding what you are looking for?
Cars & Trucks Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...