1987 Dodge Ram Wagon B250 "reset egr light van" Questions

...EGR valve?? Any help would be appreciated. Thanks. Bill Alaska replaced 9v battery but cannot find reset switch hello, if you have a vacuum pull off choke, you can try replacing your thermal vacuum ...

...reset it I have a 1995 dodge 2500 with a v10 and it runs rough at idle and the maintenance required light came on. I have tuned it up and replaced o2 sensors also profesionally cleaned the injectors ...

...EGR valve sensor and the two little vacuum hoses attached to them for $50-60 with in stock parts at the local parts store. Took less than 10 minutes to replace and is easily accessible, the check ...

...and check for any codes. The vehicle computer might have to be reset for the egr system.What they did was disconnect your battery for the quicki reset for vehicle, thats why your radio had

...reset, van ran like new. Parked for 2 days and back to same thing. This time the van will just shut off driving and rev high in neutral (2000 Rpm). Checked egr valve and seems to be okay. Spark plugs ...

...EGR valve and Thermostat Temp relay were bad. After driving about 100 miles on the highway the service enging soon light is still on. Any ideas? the free way Simply disconnect your battery, turn on ...

...egr valve, which might explain the engine light...I assume the sputtering only lasts until it warms up. Having worked for Dodge for some time, I can say that these are uncommon problems for a van so ...

...reset the codes with the same error code. I'm not a mechanic, Autozone(parts store) sugested the course of action I took. What's next? thanks, Steve Steve, get a can of starting fluid, and spray it ...

...reset. This will also cause the light to go off. Even if the light comes back on, it doesn't necessarily mean something crucial is wrong. 2. Replace both the EGR Valve, and the PCV valve. These both ...

...EGR, Purge and Fuel Trim diagnostics will be performed. Accelerate. Accelerate at 3/4 throttle until 55-60mph (88-96 km/hr). This will perform the same diagnostics as in step 3. Hold Steady Speed. ...