1987 Dodge Ram Wagon B250 "check gauge sensor" Questions

sensor circuitry-- is there a relay in this circuit? The temp gauge does not work-- we have replaced the sender unit--checked the gauge itself and the fusing and both are OK.--tried tracing the wiring

...thing. Not sure where pink wire on sensor goes as the fuel gauge is purple and black wires on it. check voltage to pink wire should be 5 volts ,it is power to senser would help to know type of

...change.. gauge? Hi. the vdc at the sensor seems to be fine. if the ground is sufficient, i would replace the gauge. its malfunctioning. Check for loose connection at gauge before replacing the

...need someone to be inside the car) if the needle travels all the way to the hot position, you will need to replace the sensor unplug the wire an ground it, gauge should move, if it doesnt check ...

torn or ripped. If that doesn't help, then check/replace all the sensors which relate temperature to the gauge, ie: air temperature sensor, coolant temperature sensor, etc...Hope this helps, good luck

...Check the gauge by holding in the trip odometer reset button and turn key to run,hold button for 10 seconds this will iniate a diagnostics on all the gauges,and lights if gauge doesn't move during ...

...gauge to stop working. Check the fuse box for any blown fuses and replace them if necessary. Instrument cluster issues: If the temperature gauge is not the only gauge that is not working, the problem ...

sensor controls the gauge. Yes you have more temperature sensors. To check which one is controls the gauge, remove the wire from the sender and see what is happening. The gauge could be defective too

thought it was my fusible link. I replaced it and it still dont work. If you are sure about your fuses, Check the fuel gauge sensor and temp. sensor check its supply. check the display lamps pls vote!

...gauge not working ,need to know location of same. Oil Pressure Sensor Testing Check the oil level and correct as necessary. Turn the ignition switch on, but do not start the engine. Disconnect the ...