2001 Ford Focus "engine problems" Questions

...coil, commutator, rotor, distributor cap, etc.) - Defective ignition switch - Problems with vehicle security system - Internal engine problems (e.g broken timing belt or gear, low compression,

...engine light came on, it flashed off and on. The car was jolting and had problems accelerating. We did fix the problem..... it was the coil pack but the engine light is still on (not flashing) but ...

...such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems ca cause many drive-ability related problem such as rough idle and other ...

Ford focus engine problem I have a ford focus 2000. I was with the light of engine problem. I check with the mechanic. They change the 2 oxigen sensor. But still the light on in the left size. About ...

engine warning in the shape of engine engine warning on instrument panel in the shape of engine showing orange if your car runs it may not be a big problem but it can turn into one if un-attended to. ...

...problems. Also engine mechanical problems ca cause many drive-ability related problem such as rough idle and other symptoms on saying that car won't go over 60km/h, sounds that you have a safe ...

00 ford focus wagon a/c & engine smoke problem A/C not blowing cold air and a little bit of smoke from the engine. Can anyone tell me if they had this experience and what did they do! Engine smoke ...

...problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms. My esteemed colleague is totally correct in his diagnostic ...

...2-3000 rpm 'bogs down' then surges No problem at idling or out of the 2-3000 rpm band. I used an engine additive with no joy. Now however my engine light has come on, on the dash. Your vehicle's ...

what does the engin block symbol represent on a car instrument panel This symbol is a check engine Light which comes on when error codes are saved about problem with engine or electrics Get an error ...