1999 Ford F250 Regular Cab "pressure" Questions

Ad

Question about Ford F-250

1 Answer

7.3 liter will not start. The low pressure side of the fuel system is ok, we have fuel to the filter and I would assume to the fuel rail as well. We decided to install a pressure guage on the high ...

Ad

Question about Ford F-250

1 Answer

...problems Aircin cuts in and out very quickly Sounds like a low Freon charge. You need to check the pressure in the system. You have 2 cutoff switches, one high pressure and the other is low

Ad

...codes showing can you tell me what they are Code #1 P0088, Code #2 P0087, Code #3 P2291 P0087- low pressure fuel system. Fuel pressur valve stock open, Fuel volume control valve stuck close, Leaking ...

WHERE IS THE IPR LOCATED ON THE ENGINE ? 6.0 DIESEL The "IPR" is and Injector Pressure Regulator. It is a Solenoid used to control the oil pressure created by the High Pressure Oil Pump. The IPR is ...

...or Oreillys may have a loaner for a deposit. The first thing to check for is the Low and High pressure sides of the A/C. Next would be the black oblong tank, a freeze switch on some systems is ...

Question about Ford F-250

1 Answer

No oil pressure when hot I am assuming you are going by the oil pressure gauge or warning light on the dash. If so, the first thing to do is have the oil pressure checked with a mechanical gauge to ...

Question about Ford F-250

1 Answer

06 f250 5.4 code r107 Do you mean p0107 ? If so that is P0107 Ford - Manifold Absolute Pressure/Barometric Pressure Sensor Low Input Possible causes - Faulty Manifold Absolute Pressure sensor - ...

Question about Ford F-250

1 Answer

no oil pressure I have a 1988 ford F-250 lariat 351 ci 5.8 li and the oil pressure has ben low when i was in low rpms but now there is absolutly no oil pressure at all. have any sugjustions? i presume

...plug light comes on it should be working and it comes on - what else can I look for? this is an oil pressure problem, either a sensor is not sensing enough oil pressure, or the high pressure pump is ...

Question about Ford F-250

1 Answer

ford 2002 powerstroke truck wont start code p 1280 and p 1212 showing p1212 is injector control pressure not detected dyring crank. p1280 is injectoe control pressure out of range. Have a fuel ...

Not finding what you are looking for?
1999 Ford F250 Regular Cab Logo

544 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...