1999 Ford F250 Regular Cab "brake pedal switch" Questions

brake pedal arm is next. light green wire with red stripe is hot if fuse 18 is ok. Depress brake pedal, light green with no stripe should have power. if not, replace brake light switch. If light green

...a 2002 f250 brake lights dont work cab brake light works.turn signals hazard etc work except for brake lights replace your stop light switch its on the brake pedal Brake light switch at brake

brake pedal, it will illuminate the blinkers. It is very easy to fix. If you are looking up at the brake pedal, you will see a little switch that when the brake pedal is pressed, touches it. Just take

break lights not working but tail lights are Check the brake light switch under the dash at the brake pedal arm, with the pedal pushed you should have 12 volts in and out of the switch.

...goes to it and waits, when the brake is depressed, it goes to the lights. the brake switch by the back of the brake pedal is usually the problem. make sure it turns on and off when pushing the

...all other lights work power to all other fuses used tester at fuses box and plug at pedal replaced tail bulb replaced brake fuse last thing tested fuse at box check p\brake pedal switch they go ...

...brake pedal.You should have power on the light green/red wire then when you press pedal you should have power on the light green wire also. If the 3rd light works but not the other brake lights then ...

...brake pedal but work with slide switch in cab. Checked fuses all checked good, is there a relay for the pedal and one for slide switch? What are the numbers for these relays and where are located. I ...

I am installing a brake box. I need to find the wire that comes off the brake pedal go to the brake pedal and follow the brake arm up until you get to a switch, there you will find the wire.

...get down and look for the switch, it will be the push type. When you press the pedal down you will see a switch being released, this is the thing controlling the brake lights. Hope this is