Question about Ford Crown Victoria
...reverse gear when engine warm. When the car starts up cold, the transmission connects to reverse gear easily. When warmed up, there is slippage and the car sounds like it is in neutral when I put it ...
...throttle and if the engine raises the mount on the side the engine raises is the side the mount is broken. then put it in reverse and do the same thing if the engine raises then that mount is
...engine is idling to high when it is in park, but when i put it in drive or reverse it starts to idles right. This is normal but if its higher then when you bought it thats another issue. Get back to ...
Question about Ford Crown Victoria
...engine as it lifts or twists. More than an inch or two you have a broken mount. Now do the same thing in reverse gear to check the other side. This vehicle is a rear wheel drive and will have 3 motor ...
...engine. This will ump out the fluid. shut it off, remove the belt, unscrew the hoses. Unbolt the pump. replace and restore in reverse of disassy. Fill with PS Fluid recommended for the car. Not a bad ...
Question about Ford Crown Victoria
...reverse, (3) When in drive my car won't pick up speed correctly so I've been driving in D2. Before have work done my car ran great, great, great. Just you would smell oil burning, and ...
...engine lights on...p.code 300..I have a 1997 crown Victoria. Police interceptor...pls help..its puttin when in drive and reverse....it ideals good..but when i push the gas its putts..my gmail is ...
...engine and transmission bolt together .You just need to get it high enough so you can get under the vehicle but PUT A JACK STAND under the vehicle after you jack it up . The rest is easy remove the 2 ...
...of gas and start the engine and check for leaks. Wishing you the very best, drprice can you replace a fuel pump from a 2000 Crown Victoria with out removing the gas tank should be in the fuel ...
...the ignition instart but do not start the engine, I can then place the shift into neutral, start the engine and then place into reverse You need to replace the shift lock solenoid or the brake
453 questions posted
Usually answered in minutes!
454 Questions
486 Questions
297 Questions
294 Questions
301 Questions