2004 Dodge Ram 2500 "signal lights" Questions

...signal lights.the wires just T off in the harness to go both ways.you don`t say but are the rear bulbs ok.there is 2 filaments in the bulbs one for tail lights and one for signals/brake lights.so the ...

...lights don't work Brake light switch has power is there a relay or switch I am missing and were is it located The circuit goes from the brake light switch thru the turn signal switch and uses the ...

...drive and when signalling the adjoining running lights turns off. Is this normal for a 2006 RAM 2500 Yes, this is a feature added by Chrysler to draw attention to the signal and make it easier to

lights/signal lights Towing package on vehicle but no power for brake or signal lights for trailer only. Truck itself is fine. Fuses are fine, read some articles that the Integrated Power Module (IPM)

right rear turn signal is not working, wiring up to power module is good and all the other signals work fine it could be that the actual light socket its self isnt working, or the relay swith for that

NO RIGHT TURN SIGNAL OR RIGHT BREAK LIGHT ON THE TRAILER NO POWER TO RIGHT TURN SIGNAL OR RIGHT BREAK LIGHT ON THE TRAILER. CHECK THE FUSE AND THE BULB THEY BOTH ARE GOOD. SOMEBODY TOLD ME IT IS THE ...

...signal on and with a small 12V lamp, connect one side to a good chassis connection (test that it is a good connection by connecting the other side of the test lamp to the battery plus terminal and ...

...assembly (reverse, blinker, brake light). Everything works except the rear passenger side turn signal but the front passenger side is blinking fast. What is the problem? You have a bad

...signal lights stop in the middle of turning sounds like you may need to replace the electronic flasher. it is a relay located typically in the fuse panel inside the vehicle 3.Have a fun with family ...

..., side marker, back up , tag lights and instrument cluster and panel lights glove box light turn signals dome lights high beam low beam middle brake light. Hope that ...