2001 Nissan Sentra "timing chains" Questions

TSB covering how to fix this problem. Have you checked the oiler supply to the timing chain and the chain tensioner Just a thought. The guides usually only break from the lack of tension on the chains

...timing chains with chains that i have ordered from the agents,now it is making a noise and my timing is totally out. I did not replaced the sockets. Can u please assist. you need to replace the ...

How to install new timing chain on GA 1.6L engine I removed the old chain by cutting, how will i install the new one without disassembling the engine? timing chain marks. 1.6 nissan To get the full ...

...timing chain this is some tips for your routine maintenance. Replace engine oil Replace engine oil filter i Chains normally do not need replacing how ever the chain guides wear out and start a ...

My 1990 nissan sentra has a noisy timing chain when running idle. I had it repaired, the timing chain was replaced, the upper and lower sprockets were replaced, tensioner and guide. The problem the ...

...chains Fig. 10: Examining the camshaft Fig. 11: Removing the second camshaft sprocket Fig. 12: Lift the timing chain up and slide the camshaft sprocket out Fig. 13: Examine the tensioners and guides ...

How to replace a timing chain, need info urgently please! You dont have a timing belt, you have a timing chain..(thats for the other foriegn automaker...that charge way to much at the lot..but are way

...timing chain which should last the entire life of the car and should not require changing If it has DOHC ist has two chains. The tensioners do wear out. Will need to have it looked at around 150K. ...

...Timing Chains do stretch over time. Nissan may guarantee the chain for the life of the car but that's all they will guarantee. They will give you a new chain and if your engine gets damaged from the ...

how do u set timing on it? 1.8 engine Installation Install crankshaft sprocket on crankshaft. Make sure mating marks on crankshaft sprocket face front of engine. Position crankshaft so that No. 1 ...