1998 Chevrolet Venture Cargo "high beams top bottom" Questions

...mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall. For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the

...high beams and one on the bottom for the low beams. Drivers side is easy, reach your hand down there and remove. The passenger side requires removal of the air cleaner top to have easy access. Hope ...

High Beams (15A) Deck Lid Release (15A) Mirrors/Antenna (5A) Head Lamp Illumenation (5A) Light Out Module (5A) EEC Ignition Coil (20A) Brake Lamps/ A/C (15A) Instrument Illumenation (5A) Column 3 (Top

...beams were very dim. Then one side stopped working so I replaced the wire kit to the light and it worked great for a day. Now one side works, high and low beam but dim. The other side only high beam ...

hi/lo beam not on at the same time replace the high/low beam switch on the bottom of the steering column, there is a rod going to it from the lever up top.

...top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side ...

...the assembly and you can move it out a small amount. Access to the bulbs is behind two rubber caps, the top one is for low beam and bottom one for high beam. Bulbs unlock with a quarter turn

...High beam works ok. Low beam bulb changed but still not working. Checked fuses in engine compartment but couldn't see any blown. I would check them electrically, not by looking, that way you can see ...

...top and then pull forward and upward to remove. It fels like something's gonna break, but it's pretty tough. Remove large round cap from behind either high or low beam lamp. Both lamps are hels in ...