...89 chevy 2500, dont know parameters PICK-UP COIL (HEI) 1. Isolate 2 pick-up coil lead wires. Remove pick-up coil connector from module. Connect ohmmeter to either terminal and ground. See Fig. 4 . ...
Question about Chevrolet K2500
89 chevy 1500 v8 have replace cap button coil pack and module still no spark have no spark have replaced cap button coil pack and had module checked and it was good now what Could be ignition switch ...
...things to check. your starter could be going but i have a 89 chevy 1500 and i had to replace the entire distributor rewired, new rotor, cap everything and now my truck starts up like a brand new
1500 timing I recently replaced the head gasket on my 83 civic. I am going to set the timing but before I do, I want to know if I need to set the crank at TDC off the marks on the crank timing gear or
...89 1500 with a 350 5.7l and i poot a new 350 5.7l out of a 94 and now flames come out of inj when you start it You either have the firing order wrong or the timing is not set right. You get fire out ...
...1500 4x2 5.7 vortec. Will not start I started having a problem with the truck not wanting to start sometime. it turns over but not start. what i do know is that it is getting gas. i can hear the fuel ...
89 k1500 towed, now fuel injectors dont fire. read all wired to and from ecm, check good. ecm will start another truck. Check the ECM fuse and then check for any loose wire connectors, especially at ...
...the fuse or replace it. trace wires to fuel pump and find terminal connectors, pull them off and do the same thing. good luck, I miss the '89 civic 1500 i used to own .. a tight, solid, fun little ...
...89 s10 will not start for days on end no matter what i do. then out of no where it will fire right up. any suggestions? fuel relay is new and so is fuel pump. There is the possibility that the ...
125 questions posted
Usually answered in minutes!
83 Questions
77 Questions
64 Questions
39 Questions
45 Questions
