1981 Chevrolet Corvette "rotor" Questions

...it? Thanks It sounds like a classic "hot brake", your caliper is probably stuck depressed on the rotor. You will probably need to replace the caliper and both front rotors as the one that is ...

i changed my distributor and i think my truck has jumped its time. did u move the rotor button at all inside the distributor whe changing it? BRING NUMBER ONE cyl up on compresion stroke top dead and ...

...plug wires and plugs. I double checked the wiring. before I yanked the old distributor I noted the rotor position, so I could place the new dist. and rotor in similar orientation. The new

...of distributor). When it gets warm it's shorting out. Easy fix, disconnect battery, pull cap & rotor - gin module is 2 screws in bottom of distributor and 4 wires - replace wires in exact order ...

1979 corvette no spark to plugs, new coil, ignition module, cap, rotor, plugs and wires... was running before tune up 1979 corvette motor was running and I did a tune up. I changed the plugs, wires, ...

...PULLED A DI DISTRIBITOR OUT PUT BACK NOW WILL NOT FIRE. hooked up the harness, right? Is the rotor back in? the only other thing is it is not lined up properly, and you will have to get the ...

I have a 84 corvette, I changed the HEI coil ignition module dist cap and rotor, I have no spark, the rotor turns, If I put 12 volts directly to the distributor, I still get no spark the dist pick up ...

when changing front rotors on a 67 vette should you rerivet rotor to hub? and can you just press the rivits to hold hub to rotor ..And how much should press rivets? My Chilton book only goes back to ...

...pack and a ignition module, is there a check engine light? Remove the distributor and watch the Rotor as you crank the engine. If the rotor doesn't turn the problem is a broken Timing Chain. If