1981 Chevrolet Corvette "key stuck ignition" Questions

...key stuck in ignition so cant change it out You can remove the ignition module as a whole and Dis-Assemble it to remove the tumblers and get the key back that way. If your replacing the Ignition set ...

Key stuck in ignition of 1976 chevy corvette stingray 350 auto Pretty much it. My key is stuck in the ignition. Car will start, but key will not return to locking position to allow it to be removed. ...

...key will not come out of the ignition, any ideas what this could be? Hello You will need to get a new ignition because I believe that one of the inside tumblers have fell Causing the key to be stuck

...key is stuck in the run position. The key will not move into any other position. I had to pull a fuse to turn the engine off and disconnected the battery. Can anyone tell me how to turn my key back ...

...key, sometimes the sensors dont come back out ,they get stuck in and dont touch chip to give reading to module, use small pick and push them in one at a time and see if they pop back out, a little wd ...

stuck unless you can get a AAA mechanic who knows how to do it for you and most do, so may a locksmith, but I'd stick with a AAA mechanic. That's their job. I know this doesn't solve your problem. But

...stuck in the lock position and even with the key inserted it will not turn, thus locking the steering wheel and vehicle in park. Try and turn the wheel from side to side while turning the key as it ...

key is stuck in igniton in 1986 corvette how to take key cylinder out and get new one back in Two special tools are needed: steering wheel puller and lock plate depresser. Both available at auto parts

...stuck, free it. If the engine has too much initial advance dialed into it, reduce it. What if you need a bunch of initial advance to make your Corvette work (for example, a high compression Corvette ...