1981 Chevrolet Corvette "fuel gage grounds" Questions

...fuel tank, after the first start I notice my oil pressure gage read 0. my oil pressure temp. stated low, and my oil pressure red light came on. What should I check first? And where do I check to see ...

fuel gauge reads Why does my fuel gauge read way over full when I turn on the key in my 1981 Corvette? you have a ground problem at tank or at gage

...gage does not work. What is this supposed to be hooked to? Will this fix all or some of my problems? The Devil is the grounds on Corvettes , I would check the lights with a test light to see if they ...

...fuel gage is a purple wire, if goes to fuel pump wiring connector. With key on, use digital multimeter, check for voltage. If no voltage, either problem with wiring circuit or instrument cluster. W/0 ...

...FUEL GAGE, THE FUEL GAGE WIRE GOES DIRECTLY TO GAGE , INSPECT THIS WIRE , MAY CHANGE COLOR ON ITS WAY TO GAGE, WIRE MAY HAVE BEEN DAMAGED UNDER TRUCK, ALONG FRAME RAIL, OR HAS BECOME CORRODED, A BUMP ...

...fuel gage is stuck on "full." and does not function as gas is used a fuel gage if grounded out gose 2 full look 4 a bare wire grounding out someware or un plug gage and see if it goes 2 ...

Fuel Gage is almost always bouncing a little in Why Is My Fuel Gage Needle Bouncing? It is almost always bouncing a little and in sink w/ some fluctuations in the headlights brightness. I replaced my ...

fuel gage requires accessing the harness from the fuel pump and grounding the yellow / white wire with 160 ohms resistance this should cause the gage to read full, and with the circuit open you should

...fuel pump and gas gage are the same (hi cost) unit. Do I really have to replace the fuel pump to fix the gas gage? Could it be anything else causing the problem? Probably not. Thanks. bad ground on ...

gage. Its the black wire coming from the fuel pump connector at the fuel pump. Either the wire is broken or the input to the body control computer is broken, thus creating high Resistance on the input