1981 Chevrolet Corvette "distributor cap" Questions

Ad

...distributor cap, and position aside. Unfasten the 2 coil cover attaching screws, then lift the cover off. Remove the 4 coil-to-cap attaching screws and lift the ignition coil and leads from the cap. ...

Ad

...7 cylinders. No spark out of 1 plugin on distributer cap. Is distributor cap bad? or distributor? Where can I buy a cheap cap or distributor? trade spark plug wire with another see if u get spark ...

Ad

...distributor cap on a1996 corvette do you have to pull the harmonic balancer to get the cap off or is there a trick. u don't pull the balancer off, you must remove the water pump, know this for sure ...

Question about Chevrolet Corvette

1 Answer

replacing distributor cap on a 1994 Vette Have a miss and scope says it is the distributor cap. Can I replace it myself? Yes, but you will have to remove the water pump. make sure you get gaskets.

Question about Chevrolet Corvette

2 Answers

...cap & rotor - gin module is 2 screws in bottom of distributor and 4 wires - replace wires in exact order and coat bottom of middle with dielectric grease, replace rotor, cap & connect battery ...

...cap,and distributor coil individually? I am trying to see how much i would be spending if i took to a mom and pop shop. Depends on if the fuel pump is inside the fuel tank or outside. Outside tank ...

Question about Chevrolet Corvette

1 Answer

...distributor cap & rotor were installed. there is fire to the distributor but no fire going out. turns over well and does not back fire. what would keep the engine from starting? Check the hall ...

Question about Chevrolet Corvette

2 Answers

...at all inside the distributor whe changing it? BRING NUMBER ONE cyl up on compresion stroke top dead and put your rotor so it points to number one plug on cap.start engine.your off a tooth or

...distributor cap and coil on a 1991 corvette there are four screws that u push down on and turn counter clockwise as you push down, they hook under the distributor, then disconnect the wiring harness ...

Question about Chevrolet Corvette

3 Answers

distributor cap. (leave the wires on) Check the inside of the distributor cap for moisture. When you washed the engine, some water may have condensed on the inside of the distributor cap. It's a pain,

Not finding what you are looking for?
Cars & Trucks Logo

257 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...