1981 Chevrolet Corvette "brake" Questions

is there a sensor for the brake light to stay on in a 1978 corvette Two reasons for the brake light to be on. 1) Parking brake and 2) problem with pressure in the brake lines. If the parking brake is ...

No brake pedal and feels like no front brakes. Brake pedal goes almost to the floor but the back brakes work well. Feels like there is no front brakes at all. brake system not purged properly, might ...

brake problem when pressing brake...brake makes an air leaking noise and brakes not working properly. have to press brake very hard for vehicle to stop. the brake power booster diaphram is leaking or ...

1991 corvette brake syatem brake pressure bleeds off brake system when brakes are not used, like when travel on the freeway.. pump up and brakes are ok.Things that I have changed are the brake booster

brake light stay on Brake pedal switch may be stuck or you could possibly have a shorted wire. Try stepping on the brake a few times to see if lights go out. If red brake indicator on dash is what you

98 corvette what is the proper procedure to bleeding the brakes Raise the vehicle on a suitable support. Remove all four tire and wheel assemblies. Inspect the brake system for leaks and visual damage

parking brake Parking brake won't release, the release button on the handle is not engaging to release the brake. how can I get the brake released? 1st step hard on the brake pad and hold then u mek ...

1981 corvette stingray the brake light has come on and stays on.The oil is ok as is the brake pads are good would it be the booster? could be a bad brake light switch which is mounted near the brake ...

how to replace brake switch on 2001 vette how do you replace the brake switch Locate the brake on off switch, remove it and replace with a new one. Switch is usually located near the brake pedal under

I cant get my e brake to hold i've replaced the cables,pads,the rotors were slightly undersized so i replaced them the automatic cable adjuster seems to be working right but they still wont hold.help ...