CORRECT POSITION SLOWLY CLOSE TRUNK LID UNTIL THE TRUNK LID LATCH AND LATCH STRIKER COME IN CONTACT TO CLOSE TRUNK.ONCE BOTH ADJUSTMENTS CORRECT. TIGHTEN THE LATCH STRIKER BOLTS TRUNK SHOULD NOW CLOSE
trunk does not latch all times The trunk latching mechanism may need to be lubed, it may not be completely latching when you close the trunk. Try use some WD-40 on it, if that doesn't work you might ...
trunk latch won't latch . The motor winds but the latch won't hook and pull the trunk down.Presently using a bunjy cord. Is there anyway to by-pass the power and get it to close manually? The latch on
Trunk latch assembly want pull down 94 Buick Park ave. truck want latch down sounds like the latch on the trunk door is stuck open try to lube with wd40 , if wont work needs replaced hope this helps
Trunk latch My 1994 Park Avenue automatic close trunk latch stopped working. I need the lower (pull-down) unit. I can't find a used one anywhere and the new units are too expensive. Is there a way to ...
trunk will latch but not close tight. Several years ago had motor disconnected so you just slam truck and not worry. Now the metal latch-catch is up high and trunk will not shut tight. Do not know how
Question about Buick Park Avenue
...trunk latch with a silicone spray or wd-40 and unlocking it with the key while it is open. There is a chance there is a small broken spring in the latch that is not pulling it over to full unlock ...
...trunk Sounds like the release mechanism ( latch) is stuck If you have fold down backseats you can access the trunk that way and if its a newer car pull the emergency relase handle... you should find ...
latch inside the trunk....sometimes it may be in the locked position already....in which case the ring that goes into it can not.....sometimes just "unlocking it with the key will reset the latch into
848 questions posted
Usually answered in minutes!
585 Questions
537 Questions
482 Questions
474 Questions
426 Questions