2005 Chevrolet Venture "clear service engine light codes" Questions

...clear it for you at no charge. Service light comes on at intervals when major services are due,you can reset it by holding the trip meter in for 1/2 minute ign on position but not running. ...

...service engine light Disconnect battery for 30 seconds If you can access an OBD11 code reader, you can plug it in the connector,on the left lower margin of the driver side front panel. it will prompt ...

...service engine light goes on, it's a good idea to have it scanned to find the code(s). This is one of the newer systems so the paper clip trick won't work for retrieving codes. Either bring it to a ...

...service engine soon light stays on.. what do I do? dlrship wants to chg me $90 just to look at it. Rent a scanner and do it yourself. If the scanner only delivers codes, you need a chart that tells ...

...service engine soon light came on. Tech said it was an oxygen sensor. Cleared code. 3 weeks ago, got oil change, replaced headlights and replaced brake lines in same visit. When I picked up van, ABS ...

...service engine soon light came on. Tech said it was an oxygen sensor. Cleared code. 3 weeks ago, got oil change, replaced headlights and replaced brake lines in same visit. When I picked up van, ABS ...

...service engine light that is produced by the vehicals computer It needs to be reset after any oil and or fluid change in this vehical all you need to do is to take it to a AUTOZONE OR any auto parts ...

Service Engine Light will come on. The fuse is located under the hood in the black fuse box on the passenger side...the box should be clearly visible & easily accessable. Look for a 30A fuse, probably

...clear?? Have replaced the front drivers side hub assembly 3x now. The Service Engine light, ABS light, and Traction light keep coming on. However, this time there is no "active" code, only history. ...

...service engine soon codes on 2003 buick regal Are you asking how to clear the check engine light? Buy a cheap code reader ( $20 ) plug it in the OBD2 port which has to be no more than 3 feet from the ...