1988 Chevrolet C1500 "chevy engine ground location" Questions

...chevy k1500 truch vortex v8 5.0 The M.A.P. sensor is located on the upper intake manifold plenum. It has a plug with 3 wires connected to it, and a vacuum hose connected to it. to chek the sensor ...

engine block. If this switch is stuck or sticking it will affect the fuel pump. Replaced a good fuel pump for nothing! The truck had sit up for awhile and the ground wire connections had to be cleaned

chevy 1500 pickup 4.3L vortec.v6 .wont start on its own needs starting fluid when i get it to run have to constantly give it gas till it runs on its own. Heard it was an oil pressure sending unit that

...chevy k10 with a stock 350 at first my starter did not have enough power to turn the motor to crank it. i have put in a new battery,cables,and starter but now its not getting any power at all. i have ...

...chevy 1500 4.3 no spark no fuel will spark at plug to motor when key turns off replaced oil sending unit oil sending unit connecter also fuel pump fuel pump relay plugs wires rotor cap and rotor bug ...

...chevy pu i was told i could run a jumper between two terminals to get codes without scanner but which two? under your dash where the ALDL is located the rectangle plug on the drivers side you take a ...

chevy suburban k1500 4x4. replaced starter, still wouldn't start. replaced battery, fuel pump, sending unit and fuel pump relay. fuel pump fuse is good. can't hear fuel pump turn on still. running out

...Chevy Cheyenne 4.3 V6 with a throttle body. It is acting like gas is not getting into the jets. I checked the fuel filter, fuses, relays, wiring to the jets, and still can't find the problem. Anyone ...

...chevy astro van ignition. Where is the ground distribution center located.? ground distribution center located.????? Doesn't have a center , has ground points - engine block - ignition ?? System ??? ...

...Chevy Silverado has many ground points throughout the truck, with the main ones located in the engine bay. These wires connect directly to the engine block and connect to the firewall, the core frame ...