2004 Chevrolet Silverado 1500 Crew Cab "spark plugs" Questions

Spark Plugs on the Drivers Side Front to Back are Your Odd Numbers 1-3-5-7 Pasenger Side is Your Even Numbers From The Front is #2-4-6-8 Is The Rear PLug . Heres a Diagram of your Spark plug Positions

...spark plugs to test, your spark should be a bright yellow. If it is dull blue, your spark is bad, or too low. How old are your spark plugs? Is there any sludge or residue on any of them? I do not ...

...to releaseYou can also use plyers to turn and release the wire. If all else fails ,and you plan to replace the spark plugs, you can always break the spark plug off and still be able to remove the ...

...spark plugs Rmove the spark plug wire from the plug and remove the spark plug. Install the o.e. a/c delco plug (available at your local parts store) and you should be god to go. Let me know if you ...

spark-plugs-for-5-3-vortec/ with affordable price. You provide the technical information which will helps me. Ac delco original platinum or iridium should not be gapped they come pre gapped and should

...spark plugs are only one of the parts required to make a reliable spark in the plug as the engine is running. 2. Check the spark plug wires and the distributor internal for rust contamination around ...

spark plug boot 2002 chevy silverado-what is the purpose of the metal sleeve with a small spring attached at the spark plug end that is on the spark plug boot that goes over the spark plug? can that ...

...your air filter or your spark plugs... Have you checked your spark plugs, wires, and cap and rotor. More than likely you have a spark plug fowling out. The cap and rotor may need to be replaced

...spark plugs....can't seem to get the spark plug wires off/loose....don't want to break by continued pulling on them U DIDNT SPECIFY YEAR BUT SOUNDS LIKE THEY HAVE BEEN ON THE PLUGS FOR A WHILE AND ...

...spark plugs and spark plug wires on a 2000 silverado, and just wanted to have some prior guidance or imaging for the replacement of the wires before i start the easiest option is to unplug one wire ...